<?xml version="1.0" encoding="UTF-8"?><metadata>
<idinfo>
<citation>
<citeinfo>
<origin>Metro Data Resource Center</origin>
<pubdate>2009</pubdate>
<title>Slope (25 percent) 2009</title>
</citeinfo>
</citation>
<descript>
<abstract>Area with a slope equal to or greater than 25 percent (12 degrees).</abstract>
<purpose>For general mapping purposes.</purpose>
<supplinf>Slope was mathmatically derived from 2005-2007 LIDAR based DEM data using ArcGIS raster processing software. The raster output was converted back to vector data and was "smoothed" to remove the "sawtooth" edges.</supplinf>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>2008</caldate>
</sngdate>
</timeinfo>
<current>Ground condition</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>None planned</update>
</status>
<spdom>
<bounding>
<westbc>-123.785577699</westbc>
<eastbc>-121.440498206</eastbc>
<northbc>46.3880499964</northbc>
<southbc>44.6838701483</southbc>
</bounding>
</spdom>
<keywords>
<theme>
<themekt>None</themekt>
<themekey>Steep Slope</themekey>
<themekey>slopes</themekey>
<themekey>relief</themekey>
<themekey>LIDAR</themekey>
</theme>
<place>
<placekt>None</placekt>
<placekey>Portland</placekey>
<placekey>Multnomah County</placekey>
<placekey>Washington County</placekey>
<placekey>Clackamas County</placekey>
<placekey>Oregon</placekey>
</place>
</keywords>
<accconst>None</accconst>
<useconst>See the RLIS Product Terms and Conditions</useconst>
</idinfo>
<dataqual>
<logic/>
<complete/>
<posacc>
<horizpa>
<horizpar>Slopes are registered to a 15x15 foot DEM derived from the 2004-2007 Metro regional LIDAR flights.</horizpar>
</horizpa>
</posacc>
<lineage>
<procstep>
<procdesc>3x3 foot bare earth DEM derived from the 2004-2007 lidar point data was resampled into a 15x15 foot DEAM using cubic convolution. The tiles for the derived DEM data where then assembled to a regional raster mosaic.</procdesc>
<procdate>20081201</procdate>
</procstep>
<procstep>
<procdesc>Percent slope was calculated on the regional 15x15 foot DEM. The resulting raster file contained slope data from 0% to &gt;25% slope.</procdesc>
<procdate>20081202</procdate>
</procstep>
<procstep>
<procdesc>The continuous slope raster was re-classed into the categories 0-7%, 7-25%, and 25% and greater</procdesc>
<procdate>20081203</procdate>
</procstep>
<procstep>
<procdesc>The 3 class raster file was converted to vector data and a multi-step generalization process was introduced to smooth jagged edges formed between individual raster cells.</procdesc>
<procdate>20081204</procdate>
</procstep>
<procstep>
<procdesc>An additional smoothing algorithm (PAEK) was run on the vector data to further enhance the data.</procdesc>
<procdate>20081205</procdate>
</procstep>
<procstep>
<procdesc>A new data layer consisting of only the 25% and Greater was extracted from the 3 class vector layer.</procdesc>
<procdate>20090102</procdate>
</procstep>
</lineage>
</dataqual>
<spdoinfo>
<direct>Vector</direct>
<ptvctinf>
<esriterm Name="met_Slope25">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">0</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<planar>
<planci>
<plance/>
<plandu>International foot</plandu>
</planci>
</planar>
<geodetic>
<horizdn>D_North_American_1983_HARN</horizdn>
<ellips/>
<semiaxis/>
<denflat/>
</geodetic>
</horizsys>
</spref>
<eainfo>
<detailed Name="met_Slope25">
<enttyp>
<enttypl>Slope_25.dbf</enttypl>
<enttypd>Description of the slope polygon attributes</enttypd>
<enttypds/>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">0</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">sdeProd_GIS_met_Slope25_ARE_2</attrlabl>
<attalias Sync="TRUE">sdeProd.GIS.met_Slope25.AREA</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>Slope</attrlabl>
<attrdef>25 - area with slope equal to or greater than 25 percent.</attrdef>
<attrdefs/>
<attrdomv>
<edom>
<edomv>25</edomv>
<edomvd>Area with slope greater than or equal to 25 percent (12 degrees).</edomvd>
<edomvds/>
</edom>
<udom>NA</udom>
</attrdomv>
<attalias Sync="TRUE">SLOPE</attalias>
<attrtype Sync="TRUE">SmallInteger</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">5</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_STArea__</attrlabl>
<attalias Sync="TRUE">Shape.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_STLength__</attrlabl>
<attalias Sync="TRUE">Shape.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STArea()</attrlabl>
<attalias Sync="TRUE">Shape.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STLength()</attrlabl>
<attalias Sync="TRUE">Shape.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
<distinfo>
<distrib>
<cntinfo>
<cntorgp>
<cntorg>Metro Data Resource Center</cntorg>
</cntorgp>
<cntaddr>
<addrtype/>
<address>600 NE Grand Ave.</address>
<city>Portland</city>
<state>OR</state>
<postal>97232</postal>
</cntaddr>
<cntvoice>503 797-1742</cntvoice>
<cntfax>503 797-1909</cntfax>
<cntemail>drc@oregonmetro.gov</cntemail>
</cntinfo>
</distrib>
<distliab>The information in this file was derived from digital databases on Metro's GIS. Care was taken in the creation of this file. Metro cannot accept any responsibility for errors, omissions, or positional accuracy. There are no warranties, expressed or implied.</distliab>
<stdorder>
<digform>
<digtinfo>
<formname>Shapefile</formname>
<transize>92.4 mb</transize>
</digtinfo>
<digtopt>
<offoptn>
<offmedia>DVD or CD-ROM</offmedia>
<recfmt>ISO9660</recfmt>
</offoptn>
<onlinopt>
<computer>
<networka>
<networkr>http://www.oregonmetro.gov/rlisdiscovery</networkr>
</networka>
</computer>
<accinstr>Email drc@oregonmetro.gov or call 503-797-1742 for further instructions.</accinstr>
</onlinopt>
</digtopt>
</digform>
<fees>RLIS subscription required</fees>
</stdorder>
</distinfo>
<metainfo>
<metd>20090430</metd>
<metc>
<cntinfo>
<cntorgp>
<cntorg>Metro Data Resource Center</cntorg>
<cntper>Justin Houk</cntper>
</cntorgp>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>600 NE Grand Ave.</address>
<city>Portland</city>
<state>OR</state>
<postal>97232</postal>
</cntaddr>
<cntvoice>503 797-1669</cntvoice>
<cntfax>503 797-1909</cntfax>
<cntemail>justin.houk@oregonmetro.gov</cntemail>
</cntinfo>
</metc>
<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv>FGDC-STD-001-1998</metstdv>
</metainfo>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 10.3.1.4959</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="FALSE">met_Slope25</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
</dataIdInfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<Esri>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">met_Slope25</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983_HARN</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot (0.304800)</csUnits>
<projcsn Sync="TRUE">NAD_1983_HARN_StatePlane_Oregon_North_FIPS_3601_Feet_Intl</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.3'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_HARN_StatePlane_Oregon_North_FIPS_3601_Feet_Intl&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983_HARN&amp;quot;,DATUM[&amp;quot;D_North_American_1983_HARN&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,8202099.737532808],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-120.5],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,44.33333333333334],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,46.0],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,43.66666666666666],UNIT[&amp;quot;Foot&amp;quot;,0.3048],AUTHORITY[&amp;quot;EPSG&amp;quot;,2913]]&lt;/WKT&gt;&lt;XOrigin&gt;-111333600&lt;/XOrigin&gt;&lt;YOrigin&gt;-98152500&lt;/YOrigin&gt;&lt;XYScale&gt;3048&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808398950131233&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;2913&lt;/WKID&gt;&lt;LatestWKID&gt;2913&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<SyncDate>20150825</SyncDate>
<SyncTime>13501600</SyncTime>
<ModDate>20150825</ModDate>
<ModTime>13501600</ModTime>
<CreaDate>20181002</CreaDate>
<CreaTime>21402600</CreaTime>
<ArcGISFormat>1.0</ArcGISFormat>
<SyncOnce>FALSE</SyncOnce>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
</Esri>
<distInfo>
<distFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distFormat>
</distInfo>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="2913"/>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">8.6.2</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="met_Slope25">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">0</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<mdDateSt Sync="TRUE">20150825</mdDateSt>
</metadata>
